🧱 Concrete Calculator
Estimate concrete for a slab, patio, driveway, footing, post hole or steps, with a waste allowance and the bag count for premix.
Also known as: Cubic Yards Calculator · Concrete Bag Calculator · Slab Calculator · Concrete Slab Calculator · Calculator Concrete Yards · Concrete Slab Cost Calculator · Cement Calculator · Concrete Block Calculator
Loading calculator…
How to use the Concrete Calculator
- Choose the shape and units.
- Enter the dimensions and quantity.
- Add a waste allowance (5–10%).
- Read the volume and number of bags.
How it's calculated
Slab volume = length × width × thickness. 1 cubic yard = 27 ft³. An 80 lb bag yields about 0.60 ft³, 60 lb ≈ 0.45 ft³, 40 lb ≈ 0.30 ft³.
Frequently asked questions
How many bags of concrete for a 10×10 slab?
How thick should a concrete slab be?
Is the Concrete Calculator free?
How accurate is the Concrete Calculator?
Can I use the Concrete Calculator on my phone or offline?
Read more about the Concrete Calculator
How much concrete do you need?
Concrete is sold by the cubic yard (US) or cubic metre. Multiply length × width × thickness with all three in feet, then divide by 27 to get cubic yards. A 10 × 10 ft slab 4 in thick is 10 × 10 × 0.333 = 33.3 ft³ = 1.23 yd³.
Read more
Add a waste allowance
Order 5%–10% extra for uneven ground, spillage and forms that bow. Running short mid-pour leaves a cold joint that weakens the slab, so rounding up is cheaper than a second delivery.
Bags or ready-mix?
An 80 lb bag of premix yields about 0.6 ft³, a 60 lb bag about 0.45 ft³. Above roughly 1 yd³ (45 × 80 lb bags) ready-mix delivery is usually cheaper and much less work. Many suppliers have a minimum order or short-load fee.
Typical thicknesses
Patios and walkways: 4 in. Driveways for cars: 4–5 in; for heavier vehicles 6 in. Footings and columns depend on load and local code — check with your building department.
When to use the Concrete Calculator
Use the Concrete Calculator for cubic yards or m³ of concrete and number of 40/60/80 lb bags for slabs, footings, columns and steps. It is one of 23 free construction & home calculators, and pairs well with the Cubic Yard Calculator, Gravel Calculator, Square Footage Calculator and Paint Calculator.
Tips for accurate results
Measure twice, round up to whole units of material, add 5–15% for waste and cuts, and check local building codes for spans, depths and sizes before buying.
Sources and review
Sources:
Every calculator is checked against published reference values before release and re-reviewed when laws, rates or guidelines change. Read our methodology and editorial policy. Found a problem? Report it — we fix errors quickly.
More Construction & Home Calculators
Popular calculators
Results are estimates for information only. Calculations run privately in your browser.